Select your business area

We use this information to provide content associated with segment of your choice.
You can change your selection any time.

TDU 107 Extended

이 소프트웨어는 다음 DEIF 제품에 적용됩니다.

다운로드 예정입니다 1.3.2.0

마지막 버전 이후 변경된 주요 변경 사항은 다음과 같습니다.

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended AGC-4 SW: 4.76.1.

New features:

  • EIC measurements can now be seen in a separate window.
  • Added support for new Boolean measurements.

Changes:

  • More texts have been included in the translation file, to extend translation capabilities of the TDU. (Controller texts and Engine DM1/DM2 texts).
  • Sync shortcut on the home screen now only requires a single press instead of a long press.
  • Internal references to measurement layout on Modbus have been updated.
  • Preferred font have been removed from the CSV file.

Corrections:

  • Current status of the DG on the alternator curve now works properly.
  • TDU Supervision is now updated correctly when using the Easy connect feature.
  • Empty AOP texts are now saved during power cycle or in TDU.config files.
  • "Autojump to sync scope" is now saved during power cycle or in TDU.config files.
  • The screensaver now shows the "Connection lost" message.
  • The branded splash screen is now shown correctly.

버전 날짜 설명

1.3.3.0

10-09-2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

New features:

  •    Further brandings are added.
  •    AGC-4 as clock master is added.

Changes:

  •    New entry point for the ECU measurement window is added.

Corrections:

  •    Parameter max. value was not taken into account for text values.
  •    If exactly 9 alarms were present, the last one was not visible.
  •    Possibility to include system information when exporting a TDU.config file is added.
  •    Preventive measures were taken to stabilize the VNC connection.
  •    Generator measurements are removed from mains TDU.
  •    Regeneration parameters are added to TDU.
  •    Application supervision now supports mains with id´s 1-16 and DG´s with ID 17-32.
 

1.3.2.0

17-06-2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended AGC-4 SW: 4.76.1.

New features:

  • EIC measurements can now be seen in a separate window.
  • Added support for new Boolean measurements.

Changes:

  • More texts have been included in the translation file, to extend translation capabilities of the TDU. (Controller texts and Engine DM1/DM2 texts).
  • Sync shortcut on the home screen now only requires a single press instead of a long press.
  • Internal references to measurement layout on Modbus have been updated.
  • Preferred font have been removed from the CSV file.

Corrections:

  • Current status of the DG on the alternator curve now works properly.
  • TDU Supervision is now updated correctly when using the Easy connect feature.
  • Empty AOP texts are now saved during power cycle or in TDU.config files.
  • "Autojump to sync scope" is now saved during power cycle or in TDU.config files.
  • The screensaver now shows the "Connection lost" message.
  • The branded splash screen is now shown correctly.

1.3.1.0

19-02-2020

Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1.

New features:

  •    Control panel instruments can now be custom scaled by pressing and holding for 3 seconds.
  •    All voltage selections in parameter 9030 are now supported.
  •    Access lock implemented; when the input is configured and active in the controller all settings are read only in the TDU.
  •    New screen is added with current measurements shown graphically.
  •    M-logic command "Inhibit. mode button" is now reflected in the TDU.
  •    It is now possible to add a separate password for control panel instruments under "Permissions".
  •    Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
  •    Running hours is now shown in the top bar, if connected to a genset controller.
  •    Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
  •    Power Management ID and priority are added to the home screen, when connected to a genset controller.
  •    Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
  •    Import/ Export: It is now possible to load a configuration file from an older software version.

Changes:

  •    20 pages are now available in the instrument panels on the control page.
  •    Lists of instrument measurements have been expanded.
  •    User access level filtering on the parameter page have been removed.
  •    DM1/DM2 texts have been expanded.
  •    When connected to a German AGC-4 with V0108 option, the manual button is removed.

Corrections:

  •    Language management create export has been corrected, when specific German characters are used in the controller translation.
  •    Visibility of the DM1 top icon has been corrected.
 

1.3.0.1

23-09-2019

Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.

Corrections:

  • Corrected: AOP shortcut on control panel page.
  • When changing mode, the confirmation dialogue now always pops up.

1.3.0.0

12-09-2019

Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3.

New features:

  • Support of AGC-4 mains controller.
  • Import/export of following settings via USB:
            - Meters on homepage
            - Password levels
            - AOP texts
            - All settings under "Display config" 
  • Added "Connection to controller" text on start-up screen.

Changes:

  •    TDU backlight timeout introduced.
  •    Fixed sporadic communication timeout messages on TDU.
  •    Extended number of status texts on the TDU.

Corrections:

  • Fixed screensaver freeze issue.
  • Corrections to some status texts.
  • Fixed rare initial communication issues.
  • Create new master language function corrected

1.2.2.0

19-06-2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

Changes:

  • Internal production handling updated.

1.2.1.0

12-06-2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

New features:

  • Implementation of offline USB update of TDU
  • Added scrolling on supervision page
  • Added hardcoded master password to DM1/DM2 clear button
  • Enhanced user feedback during restart of TDU
  • Added new EasyConnect text: "DG Ready to be added"

Changes:

  • Improved connection stability between TDU and AGC-4 controller
  • Change scaling of Fuel rate measurement

Corrections:

  • Correct Modbus offset for escape mode timer
  • Improved stability of auto connect feature
  • Added missing password prompt to AOP shortcut on home screen
  • Fixed misplaced buttons in control panel

DEIF 제품을 완전하게 활용하기 위해서는 DEIF에서 제공하는 업데이트를 설치하도록 항상 권장하고 있습니다.

업데이트된 소프트웨어는 언제나 무료로 www.deif.com의 “소프트웨어”에서 “소프트웨어 내려받기”를 통해 내려받기할 수 있습니다.

질문 또는 제품 관련 소프트웨어에 관한 문의는 DEIF A/S +45 96149614 또는 해당 지역의 DEIF 사무소로 연락해 주시기 바랍니다. 그 외에도, support@deif.com로 이메일을 보내 주시면 언제든지 도와드릴 준비가 되어 있습니다.