Multi-line 2 Utility Software v.3.x.

이 소프트웨어는 다음 DEIF 제품에 적용됩니다.

다운로드 예정입니다 3.45.0

마지막 버전 이후 변경된 주요 변경 사항은 다음과 같습니다.

USW3 build version: 1430
USW3 product database revision: 6024

New Features:

  • Support for configurable 5 line display view in AGC 150 and AGC 200 series. 
  • Support for AGC 150.
    - Firmware update USB and LAN
    - Bootloader update
    - New Multi-Input setup page
    - New Navigation icons
  • Support of ASC-4 Load Point connection in Power Management applications. 

Improvements:

  • Commissioning view in Parameter removed when irrelevant to parameter 
  • Trending settings are now allowed to be down to 20 ms (0.02s) polling.  
      - Note: Controller may not be able to deliver data at this rate.

Corrections:

  • Solves an issue where the Log page would no read all log lines. 
  • Solves an issue where plant read/write would fail in some occasions. 
  • Fixes the command line parameter for Advanced protections. 
  • Solves an issue introduced in USW v.3.44.0 where the "M-Logic and AOP items in use" window would not show all information. 
  • Solves an issue where parameters could be missing in the batch (.usw) file. 
  • Solves an issue introduced in USW v.3.44.0 where the AOP2 configuration could fail. 
  • Solves an issue where Beckhoff modules outputs were missing on the GC-1F. 
  • Solves an issue where the ASW is not shown when writing batch file on the AGC100. 
  • Fixes the battery colour in Application Supervision. 

버전 날짜 설명

3.45.0

06-05-2019

USW3 build version: 1430
USW3 product database revision: 6024

New Features:

  • Support for configurable 5 line display view in AGC 150 and AGC 200 series. 
  • Support for AGC 150.
    - Firmware update USB and LAN
    - Bootloader update
    - New Multi-Input setup page
    - New Navigation icons
  • Support of ASC-4 Load Point connection in Power Management applications. 

Improvements:

  • Commissioning view in Parameter removed when irrelevant to parameter 
  • Trending settings are now allowed to be down to 20 ms (0.02s) polling.  
      - Note: Controller may not be able to deliver data at this rate.

Corrections:

  • Solves an issue where the Log page would no read all log lines. 
  • Solves an issue where plant read/write would fail in some occasions. 
  • Fixes the command line parameter for Advanced protections. 
  • Solves an issue introduced in USW v.3.44.0 where the "M-Logic and AOP items in use" window would not show all information. 
  • Solves an issue where parameters could be missing in the batch (.usw) file. 
  • Solves an issue introduced in USW v.3.44.0 where the AOP2 configuration could fail. 
  • Solves an issue where Beckhoff modules outputs were missing on the GC-1F. 
  • Solves an issue where the ASW is not shown when writing batch file on the AGC100. 
  • Fixes the battery colour in Application Supervision. 

3.44.1

21-01-2019

USW3 build version: 1386
USW3 product database revision: 5778

Corrections

1. Advance protection Print and print preview 
2. Power management now showing in M-Logic & AOP Events
3. M-Logic offline file can be opened without connecting to controller
4. Sequence CIO and PID has been changed while batch writing 

3.44.0

06-12-2018

USW3 build version: 1372
USW3 product database revision: 5733

New Features:

  • M-Logic & AOP
     - M-Logic and AOP configuration are now organised in tabs on the same page.
     - The AOP configuration pop-up is changed to work as an AOP mimic (ASW > 4.60.0).
     - Added a visual representation (diagram) of the logic blocks selected in the logic line.
     - Added a toolbar for easy drag-and-drop of Events and Outputs to the logic lines.
     - Dynamic M-Logic and AOP are now evaluated on the logic lines diagram.   
  • Parameters - Sets of Favourites
     - Users can create/modify/delete sets of Favourites under the Settings page.
     - Users may Import/Export Favourites sets in settings under the Settings page.
     - Users can categorise parameters into different sets of Favourites.
     - Favourites filter has now a drop-down menu for selecting from the available sets of Favourites.
  • Parameters – Parameter management
     - Users can now perform selective saving and writing of parameters.
     - A new indicator help users to identify parameters that were edited, but not written.
     - Users can now filtrate the parameter list for edited parameters.
  • Advanced Protections configuration page for options A1, A10, C2 (ASW > 4.70.0)
  • Command line 
     - It is now possible to merge parameter files with the command line interface.
     - Merged parameters can be written to a file or written directly to a controller.

Improvements

  • USW is now an available application to select from on Windows side-by-side view.
  • ALCs can now be added to the left of Mains.
  • Performance improvements in reading parameters (after first read). 

Corrections

  • Fix for batch read/write and backup/restore for PID settings and ID.
  • M-Logic not displayed in USW3 under content in .usw file

 

3.43.2

27-09-2018

USW3 build version: 1236
USW3 product database revision: 5599

New

  • Adds support of upcoming AGC-4 version 4.68.0.
  • Adds support of upcoming AGC 200 version 4.68.0

3.43.2

12-06-2018

USW3 build version: 1236
USW3 product database revision: 5477

New

  • Adds support to the upcoming release of ASC-4.11.0
  • Adds support to the upcoming release of AGC-4.67.0

Improvements

  • Changes the naming of output tab in parameters to ‘Outputs’

Fixes

  • Fixes an issue in AGC 200 M-Logic where Ventilation mode and Dry mode were not working.

 

3.43.2

15-05-2018

USW3 build version: 1236
USW3 product database revision: 5368

Corrections:

  • In some cases where the OS was localised, the utility software was wrongly showing a debug version message.

3.43.1

16-03-2018

USW3 build version: 1222
USW3 product database revision: 5368

New features:

  • QR code for options upgrade
  • Visual updates in application supervision
  • Command buttons for DG units in supervision
  • Click on unit to open its command panel
  • Up to 8 configurable values may be added for each ID in supervision (only units configured on top or bottom of area)
  • Sorting I/O in alphabetical order
  • Duration of mouse-over texts is now configurable
  • USW now stores the parameter view settings so that it opens in same view next time
  • Support of AGC-4 version 4.66.0
  • Support of ASC-4 battery controller

Changes:

  • Various updates related to ALC-4
  • Various updates related to ASC-4 PV

Corrections:

  • In some situations, the USW would not show the correct application and breaker positions
  • ASC Battery: When drawing a stand-alone application for ASC Battery with only the battery, the colours are wrong

 

3.42.0

12-10-2017

USW3 build version: 1164
USW3 product database revision: 5223

New features:

  • Support of AGC-4 and AGC 200 version 4.65.0
  • Support of new power meters on ASC-4

Corrections:

  • Corrected: AGC 233 parameters not shown
  • Corrected: Emulation in AGC 200 and AGC-4 not working

 

3.42.0

01-09-2017

USW3 build version: 1164 
USW3 product database revision: 5181

New features:

  • Radio Ripple Control Receiver (RRCR) communication support for ASC-4/ASC PM
  • Option N will create exceptions for firewall, but only if the user is admin. This will be handled in the installation file
  • Includes reliability data in USW files
  • Dynamic evaluation added to AOP-1 and AOP-2
  • Navigation in the USW even when AOP window is open
  • Text representing the regulator mode
  • "Save All" files function on the USW
  • Support of new ID configuration
  • Shows SIPC number in USW3 when USW is built/used for an SIPC
  • Possible to zoom in and out in the plant view
  • Support of digital I/O in trending
  • Support of trend only mode

Changes:

  • Inverter data support updated for ASC-4, ASC PM
  • Improved dialogue when changing between units 
  • Application supervision unit ID on PV and LG
  • CIO inputs column in the Inputs/Outputs list is made wider
  • Possible to multiply the trending values so they match the CIO configuration

Corrections:

  • Strange pop-up during connection to a genset group tie removed (build 1092)
  • CIO added to OEM product IDs
  • Unconfigured TB is no longer shown
  • Corrected: Remote maintenance M-Logic missing (option H12)
  • Translation no longer reveals passwords
  • Option H13 added in option overview
  • MB is no longer shown when opening a batch file when it is not present
  • List of CIO 308 cold junction inputs is now updated when reconnecting the USW
  • Unit scaling and RMI sensor type are aligned 
  • Russian translation of RMI corrected
  • "Active alarm log" can be pulled up again after minimising
  • Dialogue box no longer keeps the existing M-Logic text
  • M-Logic no longer disappears during batch reading
  • AGC 100: Writing phone numbers with a batch write no longer results in strange characters
  • Possible to write CIO parameters with batch file
  • BTBs can no longer be misplaced in application drawings with ASC/ALC
  • Power management ID selection logic corrected, when using new IDs
  • M-Logic event C drop-down list now always opens
  • Logged alarm values are now scaled correctly

 

3.41.2

03-04-2017

USW3 build version: 1119
USW3 product database revision: 4980

New features:

  • Support of AGC 222 OEM variant
 

3.41.0

25-11-2016

This software applies to the following DEIF products:

  • GC-1F v.1.xx
  • Multi-line 2 - AGC v.3.xx
  • Multi-line 2 - PPM v.3.xx
  • Multi-line 2 - PPU v.3.xx
  • Multi-line 2 - GPU v.3.xx
  • Multi-line 2 - GPC v.3.xx
  • Multi-line 2 - AGC 200
  • GC-1F ATS
  • GC-1F/2 v.2.xx
  • Multi-line 2 - AGC v.4.xx
  • Multi-line 2 - GPU-3 REC ver. 3.xx
  • Multi-line 2 - AGC 100 v. 4.xx
  • Multi-line 2 - CGC 200
  • Multi-line 2 - CGC 400
  • Multi-line 2 - ECU 100
  • Multi-line 2 - GCU 100
  • Multi-line 2 - PPU v.3.xx Marine
  • Multi-line 2 - GPU v.3.xx Marine
  • USW3 build version: 1056
  • USW3 product database revision: 4805

Changes:

  • Additional product database updated to support AGC-4 v.4.59.0.
  • Alarm set point range of CIO 308 Pt100/Pt1000 inputs extended.
  • Please note: Only the configuration files have changed.

New features:

  • Support of CIO 116, CIO 208 and CIO 308
  • Support of ALC-4 and ASC-4

Changes:

  • Serial number made mandatory, in the option key generator.
  • Product database updated to support AGC-4 v4.59.0
  • Product database updated to support AGC 200 v4.59.0

Corrections:

  • Voltmeter on device page corrected
  • Buttons placed correctly in tree view
  • AGC 100 "Counters and identifiers" issue corrected
  • Various corrections to option N software

3.40.1

06-07-2016

40.1 06-07-2016

Changes:

  • 1- Product database updated to support AGC-4 v4.57.0
  • 2- Product database updated to support AGC 200 v4.57.0
  • Please note: Only the configuration files have changed...
  • 3.40.1 06-06-2016

Changes:

  • Product database updated to support ASC PM Solar v5.06.0
  • 3.40.1 31-05-2016

Changes:

  • Product database updated to support AGC-4 v4.56.0
  • Product database updated to support CGC 412 and CGC 413 v1.13.1
  • Minor product database updates to AGC 252
  • 3.40.1 21-12-2015 Changes:
  • Added support for AGC 252

Corrections:

  • PPM-3: In USW application configuration, two EDGs could be drawn, while only one EDG is supported in an application.
  • Please note: Only the configuration files have changed...
    3.40.1 27-11-2015 

Changes:

  • Updated Product Database for various products
  • 3.40.1 01-07-2015 Corrections:
  • USW 3.40 - F3 connection menu is not working for new users

3.40.0

24-06-2015

New features:

  • Support of AFC PM (Automatic Fuel Controller).
  • Support for Windows 8 - language selection.
  • Support for 1/10000 in units.
  • Translation tree. 

Changes:

  • CAN line names - use of primary and secondary instead of A and B.
  • Grey out of button for “activate plant configuration”, if only single unit application. 

Corrections:

  • Russian language causes PDF export to fail.
  • Parameter texts on shared channels updated correctly.
  • Missing “edit notification” in list view, after parameter change in tree view.
  • Translation issues for CGC 400, AGC 100 products.
  • Missing connect icon in emulation mode.
  • Digital status page not updated correctly.
  • TB missing in USW 3.39.0 application supervision.
  • GC-1F/2 ASW 2.31.1 Application configuration should not be visible.
  • AGC-3 Dual mains application configuration is not working.
  • TB appearing in old application drawing when shown in newer USW version.
  • Batch read from M-Logic tab not successful.
  • IP address – leading zeros.
  • Chinese M-Logic PDF export.
  • MB present when none is configured.
  • AGC 100 emulation option problem.
  • Import translation from file.

3.39.0

19-09-2014

Re-location of USW 3.39.0 - link to NTP-patch included

3.39.0 26-09-2014 NTP patch for USW 3.39.0

A patch is needed to make the NTP-configuration work.

In future releases this won’t be necessary.

3.39.0 26-09-2014 NTP patch for USW 3.39.0

A patch is needed to make the NTP-configuration work.

In future releases this won’t be necessary.

3.39.0 26-09-2014 Re-location of USW 3.39.0 - inclusive link to NTP-patch. 

New features:

  • Support of ASC PM (Automatic Solar Controller).
  • Support of Qc1103. 
  • Support for firmware download to webarm hardware with new flashes mounted.
  • Support for configuration of NTP in webarm from ver. 2.40.0.

 Changes:

  • Possibility to change Loginfo scaling factor.
  • Change of bit mask when writing inhibit configuration to device.

 Corrections:

  • Access level update
  • CGC 400 - missing Russian letters for translation 
  • Russian language support now working 100%
  • USW 3.38 usw files not recognised by Windows.
  • PPM-3 cannot open batch files "File format error"

3.38.0

11-06-2014

New features:

  • Update boot SW (Standard ML2 ver. 3 products)

Corrections:

  • PPM-3 display of power measurement
  • USW 3.37.0 freezes when connecting to PPM unit
  • CGC 200: default parameters available before reading from device
  • CGC 200: Parameter editor - dropdown list value selection
New features:
Update boot SW (Standard ML2 ver. 3 products)

Corrections:
PPM-3 display of power measurement
USW 3.37.0 freezes when connecting to PPM unit
CGC 200: default parameters available before reading from device
CGC 200: Parameter editor - dropdown list value selection

3.37.0

01-04-2014

New features:

  • Support for extended Chinese characters in CGC 400
  • Support of AGC PM product

Changes:

  • Scaling in Trending - Default setup and possibility to choose alternative 

3.36.0

23-12-2013

New features:

  • Parameters: Tree view for AGC 100 variants
  • Parameters: Reloading of dependent parameters for AGC 100 variants
  • Support of firmware upgrading over a TCP-IP connection if the AGC-4 is version 4.40, the option N has version 2.20 and the boot code has version 1.03.0
  • Communication: Faster communication over TCP-IP if the option N has version 2.20
  • Communication: Network parameter pop-up to easily set the IP address, netmask and gateway if the AGC-4 is version 4.40 and the option N is version 2.20
  • Logs: Support of up to 500 alarms and event log lines
  • Views: Tree view of the Views items
  • Identifiers: Display of boot code and option N firmware version
  • Identifiers: Display of production info like serial number, order number and production date

Corrections:

  • Faster communication over USB when a parameter pop-up is open

3.35.0

30-08-2013

New features:

  • Project Properties: Store user-defined comments as part of usw file 
  • Project Properties: Display the firmware version from which the different components inside the usw file originate 
  • Alarms: Double-click an alarm and open the corresponding parameter 
  • Parameters: Alarm status is updated while a parameter popup is open 
  • Parameters: Simultaneous display of multiple parameter popups 
  • Parameters: Export/import of the list of favorite parameters 
  • Parameters: Inhibits column added to the list view 
  • Parameters: Favorite and Modified-Parameter filters work in tree view as well (AGC-4 and AGC 200) 
  • Parameters: Reloading of dependent parameters (AGC-4 and AGC 200)
  • Parameters: For selected parameters the Output A & B values are shown in the tree view mode (AGC-4 and AGC 200)
  • Parameters: Display the parameters for the AGC 200 in a tree-like structure 
  • Logs: Open .sdl files originating from the flashcard in AGC 200 
  • New USB driver for CGC 200 and CGC 400 variants. 

Corrections:

  • The application retrieved during the initial connection to GCU 112 does not cause an error message
  • Identifier texts with Unicode characters are not written correctly to AGC 200 products

3.34.1

08-05-2013

Corrections:

  • The firmware flashing of the CGC 200 works on all PCs
  • Scaling is working correctly for controllers configured to different power and voltage scalings
  • Cos phi is removed from the Electrical data window for PPM controllers
  • The apparent power (S) in the Electrical data window is correct for PPM controllers
  • The offline Batch-read procedure is working correctly
  • The data fields in the Electrical data no longer appear to be editable

3.34.0

20-03-2013

New features:

  • Support of the CGC 200 and CGC 400 variants
  • Support of the AGC 100 variants
  • Support of the AGC 200 firmware 4.21
  • Support of the ECU 100 and GCU 100 variants
  • Install script updated:
    a) shows EULA
    b) displays the USB installation popups sequentially
    c) CGC 200 USB driver added
  • Supervision: Display of all available electrical data for the controllers in the application
  • Supervision: Emulation support in a broad range of products (AGC 100, AGC 200 firmware >= 4.21,ECU and GCU 100 variants)
  • Supervision: Save a screen copy to a graphical file 
  • Supervision: Plant settings popup for easy access to parameters often changed after commissioning (applies only for AGC-4 and AGC 200 variants)
  • Parameters: Display of parameters in a tree-like structure (applies only for AGC-4 variants and CGC 200)
  • Alarms: Acknowledge of alarms individually
  • Chinese localisation

Changes:

  • Connecting to device procedure is more intuitive
  • Alarms: Display of current alarms and alarm history

Corrections:

  • The writing of Translations has been improved
  • M-Logic and AOP lines have a consistent numbering in the relevant popups
  • Read logs from GC-1F no longer fail

3.33.0

09-10-2012

New features

  • Support of redundancy (AGC-4 only)
  • Indication of the parameters that have been changed since commissioning (AGC-4 only)
  • Display in Appl. Supervision of the names assigned to engines, breakers and mains (AGC-4 only)
  • Possibility to reset logs in the controller (AGC-4 and AGC 200 only)

Changes

  • M-logic page is empty initially
  • M-Logic page adjusts to the width of the window
  • Device page can handle negative power values

Corrections

  • Batch write issue regarding Modbus configurator data was fixed
  • Application Configuration page does not show “AGC” in the header initially
  • Service level user can change the access level of any parameter to any lower level
  • Data tracer will show the same number of digits as in the Trending window

3.32.0

07-06-2012

Install script updated to remove temporary files, which can cause problems during installation 

New features:

  • The Connect Symbols are shown in Application Supervision to indicate the connected controller
  • The texts assigned to digital inputs are shown in the Emulation inside Application Supervision
  • Printout of Engine and Genset data in Application Supervision
  • Applications are presented in tabs in Application Configuration
  • Improved user interface to perform activation and broadcasts of applications
  • Customisation of column widths in Parameter and Translations pages
  • Execution of selected functions at the Windows Command prompt
  • Automatic adjustment to the baud rate of the controller
  • Faster batch writing of languages as those not translated are skipped
  • Parameters can be tagged as favorites and a favorite filtering in the Parameter list can be applied
  • The access level can be changed for a selected list of parameters
  • Which columns to show and the sequence of these can be customised in the Parameters page
  • Only enabled M-logic lines are shown on printouts
  • Counter and Identifiers information can be printed

Changes:

  • Properties of the following products were updated: AGC-3, AGC 200, PPM-3, AGC-4, GC-1F/2, PPU-3, PPM-3, GPU-3, GPC-3, GPU-3 REC, APU 264

Corrections:

  • For the PPM-3 the terminal numbers given in the I/O page are correct
  • Only Modbus ids in the range 1..247 are allowed
  • Various improvements in the Color Scheme Editor in Supervision
  • The configuration made with the Modbus Configurator can be stored as part of an usw file
  • Breaker in Device page of APU 264 is updated correctly
  • Older PPM-3 firmware no longer cause errors in USW 3
  • Choosing the language to activate after doing translations also works with TCP-IP connection

3.31.0

Changes

  • Product updates: AGC-3, AGC 200, PPM-3, PPU-3, GPU-3, GPC-3, GPU-3 REC, GC-1F/2, AGC-4
  • OEM options are removed from the Options page.
  • OEM options are removed from the Option wizard.
  • The user access level required for performing an update of the controller firmware of a GC- 1F is changed to "Customer".
  • The keyboard shortcut “Alt+Tab” allows navigation back and forth between the USW and other  applications even when a popup is open
  • Trending allows only realistic sample rates.

New features

  • The Modbus Configurator (to set up the configurable memory area) is built into the USW
  • Modbus configuration is included in the Batch Read/Write
  • Notification sounds in case of alarms and batch operations.
  • Custom logo can be used on printouts
  • Broadcast progress is indicated in Application Configuration and Application Supervision (if supported by controller)
  • New permission rule that prevents the user to see parameters that cannot be edited at  current access level

3.30.1

07-12-2011

Changes:

  • Supervision page is updated consistently according to active application.
  • Batch read/write improved when offline.
  • The correct access levels are applied for GC-1F.
  • Edition of Energy counters improved.
  • USW no longer claims exclusive access right to files.

3.30.0

08-11-2011

New features

  • Support of the new controller AGC-4
  • Counters: read-out of various counter values from the controller
  • Identifiers: read-out of various id’s used the controller
  • Dynamic M-Logic evaluation: the values for the M-Logic lines are evaluated on-the-fly
  • AOP and M-Logic lines in use: provide an overview of where different event types are used in the logic lines
  • Batch read: allows the read-out of logs and export to Excel file format
  • Backup/restore: backup a controller for later restoring
  • Translations: Prompt for selection of which language to set active after the writing of translations
  • The language of the USW 3 application can be set to Russian
  • Support for automatic reconnection after firmware flashing
  • Display of all controller views at the same time
  • A time offset used during synchronizing the time of the PC with the controller can be set
  • Explicit scanning for available COM ports
  • Emulation of a plant and response to e.g. inputs
  • Deep dive allows to navigate between the upper and lower levels of option G7 based plants
  • Permission: control which access levels can do what
  • Display of the engine data retrieved over j1939 by the controller

Changes

  • Only buttons and menus relevant for the offline situation are shown at startup of the USW 3
  • During batch read/write the sequence of items is changed
  • The help functionality has been updated with the new features listed below
  • An issue regarding the sending of emails and/or SMS’s from the N-option is fixed
  • In offline mode the Device page corresponding to a open file is shown
  • User is prohibited to enter invalid IP address in the N-Option application
  • Setting of the trending update rate is fixed
  • The offline writing of view is no longer, mistakenly, reported as successful
  • Logs: order of first two columns Timestamp and Text is switched so Timestamp goes first

3.21.0

15-04-2011

  • New features
  • AOP, Views and I/O Settings buttons in the top toolbar are active if connected to a device or an USW file with corresponding information is loaded.
  • Support of GPU-3 REC
  • Support of GC-1F ATS
  • Support of AGC 222
  • Support of various new parameters in PPM 3.05
  • The application Modbus Configurator is added as part of the USW installation. This  application is used to perform a memory mapping to the configurable memory area in the devices.
  • Application Settings: Functions to clear the settings that the USW saves from  session to session
  • Option Wizard: Last entered customer information is displayed as default
  • Project properties: Option- and hardware configuration can be copied to clipboard
  • In Batch Read/Write a new shortcut, Ctrl-A, selects all items Changes
  • Translations written from a Chinese PC: the issue, where the character "?" was  shown in GC-1F variants is fixed.
  • Terminal numbers in the Inputs/Outputs page are corrected for AGC-3.
  • Application Configuration is handled before Parameters during Batch Read/Write operations.
  • Cyrillic K (К) handled properly
  • Removal of “Generate random data”
  • Supervision: “Engine data” was renamed to “Genset data”
  • Writing of the netmask (AGC2xx products) is fixed.
  • M-Logic dropdowns are always repopulated when connecting to another device type
  • When logs are exported to Excel also the timestamps are saved in the file

3.20.0

04-02-2011

New features

  • Support of the new product GC-1F/2
  • Support of the new products APU-3, APU 264
  • Move and copy items in M-Logic
  • List of existing ports is displayed in communication setting popup
  • Connectivity check in Supervision (require AGC firmware 3.6 and above)
  • Compatibility check in Supervision (require AGC firmware 3.6 and above)
  • Engine data in Supervision (require AGC firmware 3.6 and above)
  • Cyrillic display option (CYD) shown in Options
  • Terminal numbers shown in Input/Outputs
  • Tooltip texts for parameters
  • USW files can be shared among selected products series:
  • AGC 212, 213, 232, 242, 243
  • AGC 245, 246
  • GC-1F and GC-1F/2
  • List of keyboard shortcuts is extended
  • Subnet mask can be edited for AGC 200 series if supported by product (require AGC firmware 3.6 and above)
  • Device flashing and clock synchronization as part of the optional batch write steps.

Changes

  • Improved scaling in the Device page of PPU-3, GPU-3, GPC-3, GPC-3 Hydro
  • Updated Help functionality
  • Installation on Windows 7 does not require administrative rights
  • More intuitive tabing order in M-Logic
  • Colour scheme editor and color scheme selection joined in the same popup
  • Improved scaling of meters on Device page for GC-1F

3.16.0

24-08-2010

New features

  • Import translations from file into selectable columns in Translations.
  • Assign language names to translations columns.
  • Change the sequence of the language columns in Translations.
  • Copy language columns to other columns in Translations.
  • Full 64 bit support:
  • Signed USB driver for AGC 200 for 32 and 64 bit Windows platforms (XP, Vista and 7).
  • Signed USB driver for AGC-3, PPM-3, PPU-3, GPU-3, GPC-3, GPU-3 Hydro for 32 and 64 bit Windows platforms (XP, Vista and 7)
  • Drag-‘n-drop of USW file onto the USW application.
  • Led or button number is shown in the header of the AOP item popup.
  • User confirmation when writing AOP1, AOP2 or M-Logic.

Changes

  • Updated Option wizard.
  • Improved support of translations in AGC 200 series.
  • Improved writing of translations.
  • Improved support of Applications with a ring-shaped bus-bar.
  • Improved error handling during writing of translations to GC-1F.
  • Support of PPM 3.04.
  • Support of new parameters for PPU-3, GPC-3, GPU-3, GPU-3 Hydro.
  • Updated Help functionality.

3.15.1

07-05-2010

Changes (USW 3.15.1)

  • Writing of M-Logic, AOP1 and AOP2 configurations are password protected.
  • Enabled flags are written correctly when writing parameters.
  • New features (USW 3.15.0)
  • Support of AGC 200 variants which includes:
  • Unicode text support in Translations
  • Retrieval of logs
  • Firmware upgrading
  • Configuration of TCP/IP network parameters
  • New USB driver
  • Export of reports to PDF
  • Support of voltage and power scaling in PPU3, GPU 3 and GPC 3
  • M-Logic/AOP improvements:
  • Color symbol to indicate the Enabled state of each line
  • Optional user-defined description field for each line
  • IP address edited in Settings dialog box through combobox with auto completion
  • Plant Option dialog box: In offline mode the Product type is selected from a list of product families
  • Batch Read/Write can be cancelled
  • Save Application Configuration to jpeg file
  • Installation file is digitally signed

Changes (USW 3.15.0)

  • Increased Parameter writing speed
  • Single DB application colored correctly
  • Batch jobs: The caption shows whether it is a read or write batch job
  • Improved export to Excel file format (content and format)
  • Improved device filtering to prohibit writing of parameters from one device type to another
  • Writing of M-Logic, AOP1 and AOP2 configurations are password protected
  • Number of languages written in Translations cannot exceed the max allowed by the device
  • Ring connected busbar is handled consistently

3.15.0

05-05-2010

New features

  • Support of AGC 200 variants which includes:
  • Unicode text support in Translations
  • Retrieval of logs
  • Firmware upgrading
  • Configuration of TCP/IP network parameters
  • New USB driver
  • Export of reports to PDF
  • Support of voltage and power scaling in PPU3, GPU 3 and GPC 3
  • M-Logic/AOP improvements:
  • Color symbol to indicate the Enabled state of each line
  • Optional user-defined description field for each line
  • IP address edited in Settings dialog box through combobox with auto completion
  • Plant Option dialog box: In offline mode the Product type is selected from a list of product families
  • Batch Read/Write can be cancelled
  • Save Application Configuration to jpeg file
  • Installation file is digitally signed

Changes

  • Increased Parameter writing speed
  • Single DB application colored correctly
  • Batch jobs: The caption shows whether it is a read or write batch job
  • Improved export to Excel file format (content and format)
  • Improved device filtering to prohibit writing of parameters from one device type to another
  • Writing of M-Logic, AOP1 and AOP2 configurations are password protected
  • Number of languages written in Translations cannot exceed the max allowed by the device
  • Ring connected busbar is handled consistently

 

New features
- Support of AGC 200 variants which includes:
a) Unicode text support in Translations
b) Retrieval of logs
c) Firmware upgrading
d) Configuration of TCP/IP network parameters
e) New USB driver

- Export of reports to PDF
- Support of voltage and power scaling in PPU3, GPU 3 and GPC 3
- M-Logic/AOP improvements:
a) Color symbol to indicate the Enabled state of each line
b) Optional user-defined description field for each line

- IP address edited in Settings dialog box through combobox with auto completion
- Plant Option dialog box: In offline mode the Product type is selected from a list of product families
- Batch Read/Write can be cancelled
- Save Application Configuration to jpeg file
- Installation file is digitally signed


Changes
- Increased Parameter writing speed
- Single DB application colored correctly
- Batch jobs: The caption shows whether it is a read or write batch job
- Improved export to Excel file format (content and format)
- Improved device filtering to prohibit writing of parameters from one device type to another
- Writing of M-Logic, AOP1 and AOP2 configurations are password protected
- Number of languages written in Translations cannot exceed the max allowed by the device
- Ring connected busbar is handled consistently

3.14.0

28-12-2009

New features:

  • Support of AGC 3.50
  • Support of PPM 3.03
  • Support of PPU 3.00.1 and its variants
  • Support of New N-Option board (M1)
  • M-Logic items collapsible/expandable
  • Device ID visible on the status bar
  • Connected device versus USW file compatibility check

Changes: 

  • Dedicated GPU Hydro device overview
  • Supervision legend improved
  • Colour Scheme Editor in Supervision improved
  • Improvements to Translations 
  • Improved high alarm handling when using an older USW file
  • N-option button only shown for supporting devices

3.13.0

15-10-2009

New features:

  • Support of PPU3 and its variants.
  • Search facility on the Parameters view.
  • File association and distinctive icon for USW files.
  • Dynamic legend on the Application Supervision view.
  • Adjustable Polling delay for TCP-IP communication.

Changes:

  • Performance boost in M-Logic loading.
  • Parameters view improvements.
  • Translations view: Extended Character dialog improved.
  • Support of 20 configurable views in the AGC 3.4xx 
  • Plant view for the gen-set mode “Mains Power Export” improved.

3.12.1

13-07-2009

Changes:

  • Support of AGC 3.41
  • Changes: 

    - Support of AGC 3.41

3.12.0

15-06-2009

New features: 

  • Application configuration and Supervision works with up to 256 Gen-sets as supported by the G7 option in AGC 3.40 
  • In Application Supervision three colors are used to indicate the state of the Gen-sets and bus-bars 
  • Device IDs can be changed in Application Configuration 
  • Support of TCP-IP Modbus communication through gateway to AGC or PPM without N-option card. 
  • New command line parameter BATCHWRITE, which perform a batch write operation with the project file provided by the argument of the OPENFILE parameter 

Changes: 

  • Enhancement of translations reading: Only available translations in the device are retrieved instead of all translations. 
  • Printing an application configuration from the USW will no longer cause it to close. 
  • When some multi-inputs are configured to digital inputs, their statuses are now updated in the Inputs/Outputs view. 
  • Various fixes and enhancements in Trending. 
  • Printing of translated strings is fixed. 
  • The USW version is shown in the title bar 

3.11.1

24-03-2009

New features: 

  • User-customizable Read/Write timeouts: The connection-settings dialog allows the end-user to adjust various read/write timeouts. 

Changes: 

  • Support for PPM - 3.01.0. 
  • If a firmware upgrade fails, it is not possible to repeat this operation when the display shows “BOOT MODE, FLASH ERASED” (this applies only to USW 3.11.0).

3.11.0

18-02-2009

New Features

  • Improved PPM support 

Corrections

  • Improvements in “Application configuration” 
  • Modification of “Enable” and “High alarm” columns in the parameter list 
  • Minor improvements to the plant view 
  • Scaling of plant view instruments at high voltage values improved 
  • Communication status improved 
  • Trending improvements 

3.10.2

03-10-2008

New features:

  • Added support for installation of new firmware for the AGC/PPM N-Options.

Changes:

  • Improved stability of the Modbus TCP/IP interface.
  • Max tags in the N-Option feature ‘Advanced logging’ changed to 48.

3.10.1

18-07-2008

New features:

  • Clicking on the logo at the top of the navigation bar will bring you to our homepage
  • Outputs A & B are now shown as explicit texts in the parameter window and the printout
  • After synchronization of the translations, untranslated and already translated texts are clearly indicated

Changes:

  • The commissioning panel is now active regardless of the value of the timer
  • Writing a parameter file via a “batch write” will trigger a consistency check when appropriate

Corrections:

  • Status when performing a “batch read” operation updated
  • Two fail class groups could appear when configuring an AOP
  • Button 2 on an AOP template was not aligned correctly
  • Behavior of the translations synchronization updated
  • Error message when leaving the translations window removed

3.10.0

30-06-2008

New features:

  • Plant configuration and supervision (AGC 3.30)

Changes:

  • Translation: Improvements in visualization and mask handling.
  • Recently used file list handling updated.
  • Placement of meters in AGC Dual main configuration adjusted.
  • Input/Output window handling.

Corrections:

  • Trending: Gain on some values adjusted.
  • Data tracer: Handling of ‘Unit names’
  • Firmware download recovery mode.

3.00.30

19-03-2008

  •  Backward compatibility improved for ‘.usw’-files including languages.

3.00.29

05-03-2008

New features:

  • Translations are now part of batch operations.
  • Support of all fonts/charsets (Display unit european and cyrillic, graphical display european/cyrillic and limited european/chinese).
  • Extended characters dialog redesigned.
  • Font selection dialog added (graphical display only).
  • Baud rate negociated with the unit (GC-1F only) up to 115200 bauds.
  • Communication type shown on the status bar (serial COMx, TCP-IP IP: x.x.x.x).
  • Application software/firmware file extension automatically selected according to the connected unit.

Corrections:

  • Batch read/write: All AOP2s (ID 1 to 5) are readen/written instead of AOP2 ID 1 only.
  • Parameters: When sending parameters stored in a project file, some parameter settings (configuration bits) could be overwritten in the unit.
  • Parameters: Some items on the categories tab sheet could not be reached with mouse.
  • Project file properties: Some hardware items could be duplicated.
  • About window: Centered on the main monitor instead of the desktop (dual monitor systems).

3.00.27

11-10-2007

Correction:

  • This USW release circumvents an issue present in the AGC firmware between release 3.10.2 and 3.21.0, where some parameters would not appear on the parameter list as expected.

3.00.26

20-09-2007

New features:

  • The parameter inhibits are now shown on the parameter printout (only for parameters having inhibits defined).
  • Parameter printout changed a bit (alternate colors).
  • AOP1/2: Possibility to name individually leds and buttons (information saved in project file).

Changes:

  • AOP1/2: Leds and buttons drawing changed slightly. M-Logic rule enabled -> white background. M-Logic rule not enabled -> hatched white background.
  • Parameter filtering modified.

Corrections:

  • When working on a saved parameter file (in a project file), and when editing a parameter, relays could appear as transducers.
  • Faulty dependency check in I/O settings when working offline (information was based its dependencies on the device information).
  • New features:
    - The parameter inhibits are now shown on the parameter printout (only for parameters having inhibits defined). 
    - Parameter printout changed a bit (alternate colors). 
    - AOP1/2: Possibility to name individually leds and buttons (information saved in project file).

    Changes:
    - AOP1/2: Leds and buttons drawing changed slightly. M-Logic rule enabled -> white background. M-Logic rule not enabled -> hatched white background. 
    - Parameter filtering modified.

    Corrections:
    - When working on a saved parameter file (in a project file), and when editing a parameter, relays could appear as transducers. 
    - Faulty dependency check in I/O settings when working offline (information was based its dependencies on the device information).

3.00.25

13-07-2007

  • List of the most recently used project files added.
  • Writing of translations improved
  • Offline configuration of the AOP-1 and -2 improved
  • 1- List of the most recently used project files added.
    2- Writing of translations improved
    3- Offline configuration of the AOP-1 and -2 improved

3.00.24

26-06-2007

  • Batch upload/download officially introduced (not in preview anymore).
  • Save As feature
  • Possibility to print all reports in A4 or Letter
  • Option upgrade order form is now in english only
  • AOP 1/2 printout refined
  • Possibility to choose Modbus serial or TCP-IP
  • Changes in the product database
  • N-Option configurator

3.00.21

30-04-2007

  • Changes for GC-1F.
  • Changes for GC-1F.

3.0.0.20

23-02-2007

  • Support of GC-1F product.

3.0.0.19

01-02-2007

  • Support of the latest AGC release 3.1. 
  • Usability of the parameter category filtering improved.
  • Project file handling enhanced.
  • Help file format changed.

3.0.0.18

17-10-2006

  • First release

DEIF 제품을 완전하게 활용하기 위해서는 DEIF에서 제공하는 업데이트를 설치하도록 항상 권장하고 있습니다.

업데이트된 소프트웨어는 언제나 무료로 www.deif.com의 “소프트웨어”에서 “소프트웨어 내려받기”를 통해 내려받기할 수 있습니다.

질문 또는 제품 관련 소프트웨어에 관한 문의는 DEIF A/S +45 96149614 또는 해당 지역의 DEIF 사무소로 연락해 주시기 바랍니다. 그 외에도, support@deif.com로 이메일을 보내 주시면 언제든지 도와드릴 준비가 되어 있습니다.