Multi-line 300 DU 300 ver 1.x.x

1.0.20.0

20-07-2022

New features:

• Introduces a new view for exhaust after-treatment dashboard increasing the support of Tier 4 and Stage V engines.

1.0.19.0

01-07-2022

New features:

• Identification of controllers in Pairing page.
  • Added the ability to send the "Identify" command from the "Pair" page.
  • This command creates a blinking pattern of the power LED of the PSM3.1 card.
  • This allows users working in an environment with multiple controllers to easily confirm the controller they wish to pair the display with.
• Support for CODESYS custom info pop-up and status text.
  • This allows CODESYS designers to provide better user experience by delivering messaging and status information of the CODESYS application.

Changes:

• Synchroscope page label
  • Added a label to identify the breaker that is being synchronised.
  • This improves the recognition of the controller being synchronised.

1.0.18.0

23-04-2022

New features:

• DU300 button management.
  
  • Added the ability to disable (and enable) the buttons of the DU300 by parameters.
  • The buttons are disabled in blocks related to their functionality.
  • This provides more possibilities to configure the controller to the application's requirements.

Corrections:

• Fixed an issue with the differentiation of two synchroscopes with the same measurements, like an EDG.
• Fixed an issue related to ANSI codes shown on the alarm popup.

1.0.17.0

25-01-2022

Changes:

• Improved navigation and look of the Parameters page.

Corrections:

• Solved an issue that would cause the DU 300 to crash when downgrading DU software.

1.0.16.0

11-10-2021

New features:

• Support for Tags:
  
  • New menu for options to display the tags set in parameters.
  • Options for tag visualisation include: Alarm pop-up, alarm list, logs page and parameter page.

Changes:

• Update to languages
• Connection improvements

Corrections:

• Solves an issue where the display could enter a manual loop after returning from synchroscope.

1.0.15.1

14-07-2021

Changes:

• Font size and duration of error message increased in the virtual keyboard.
• New counters icon for alignment with PICUS.

Corrections:

• "Missing" counters removed from the display.
• Units shown for the I/O terminals.
• Counters are now limited based on the counter type.
• Display restarts on I/O pages when fieldbus configuration is updated.
• LED's no longer light up before the screens become active.
• Passwords with special characters can now be used from the display.

1.0.15.0

24-02-2021

New features:

• Synchroscope view.

Changes:

• Local display configurations (for example, brightness and units) will now be kept when new application software is installed.

Corrections:

• Bar graphs and gauges animations performance is increased.
• Fixed an issue in View Design where up/down keys lost focus after a blue pop-up.
• Fixed an issue in Parameters where up/down buttons would not be shown.

1.0.14.0

28-01-2021

New features:

• Custom alarm action suppression: It is now possible to enable alarm suppression for custom alarms from the display.
• Fast data interface: Faster update rate of gauges, counters, status texts, and live data views.
• Engine communication:
  
  • J1939 alarms and historical events.
  • Fieldbus, configuration, supervision and CANbus error handling.

Corrections:

• Fixed translation of texts in the View designer.
• Fixed translation of message box popup breadcrumb.
• Fixed DU300 live data subheader text cutting lower case p, g, j, q, y letters.
• Fixed DU300 showing negative ampere.
• Fixed conversion between C and F not having effect on scaling (View design).

1.0.13.1

03-08-2020

Changes:

•  Change default DU300 font to Noto sans

Corrections:

• Not converting set point and hysteresis to F on custom alarms
• Memory leak during PPU 300 long term test

1-0-13-0

09-06-2020

New features:

• Support of IOM3.2 and IOM3.3.

1.0.11.1

15-04-2020

This software package consist of:

• DU 300 SW version 1.0.11.1

Changes:

• New Chinese font.

Corrections:

• Fixed that DU 300 was not showing the correct prefix according to the scale.
• Fixed that DU 300 was showing "undefined" entry in the value list for SYSTEM events.
• Fixed a missing retranslation of IO card info in DU 300.
• Fixed a memory leak in the display.
• Fixed a missing translation of texts in units and in the user permission screen.

1.0.11.0

17-12-2019

This software package consist of:

• DU 300 SW version 1.0.10.1

New features:

• Extended alarm information.
• Support of ACM3.2 V.1.0.0.0.
• Support of Trip breaker outputs.
• Support of /IO extension unit.

Changes:

• Version page layout.
• Backup and restore information.

Corrections:

• Text bug in live views.
• DU shows random info message.
• Display showing wrong version number.
• ApplState not updating text.
• Backup from the display shows undefined text in information window.
• Missing text for View design.
• Restore info page: Not all cards is shown.
• Display does not update alarm and event texts, when the custom text is changed on external breaker.
• Backup status should handle error status.
• Possible to enter alarm sub-menus with an empty alarms list.
• Parameter settings are shown on the display, when setting up digital outputs.

1.0.10.1

23-10-2019

This software package consist of:

• DU 300 SW version 1.0.10.1

​

Changes:

• Support for BSP 3.0.0.1 

1.0.10.0

04-03-2019

This software package consist of:

• DU 300 SW version 1.0.10.0

New features:

• Support for multiple menu levels.
• Display shows a pop-up window for the user before going into service mode.
• Informs the user about development of the software.

Changes:

• Support for PlantSupervision ver 1.0.5.0.

Corrections:

• IOM3.4: DO's are not shown on display and in PICUS.
• Display is not loading min. and max. from parameters when they are changed.
• Power derate temperature is not shown on DU until power cycle.
• When changing type, DU sometimes freezes until it restarts.
• DU300 reboot in view designer.
• Not able to close alarm pop-up.
• Alarm "trigger value" is not updated if the alarm is already in the alarm list.
• DU300 does not check versions for individual REST resources.
• View designer cannot add counters to counters template.